Description
Exhaust Manifold Studs & Lock Nuts For Nissan 240sx DOHC KA24DE SR20DET CA18DET
(FITS: DOHC KA24DE SR20DET CA18DET Series Motors)
(Will Not Fit: SOHC Motors)
(8) M10x1.25 Studs
(8) M10x1.25 Top Locking flanged Nuts
(2) Regular Hex nuts to properly install studs.
▪︎Stud Hardware
-The thread pitch is M10x1.25
-Studs are hardened (155,000+ Minimum Tensile Strength.)
-Yellow Zinc Chromate is a highly resistant commercial grade corrosion plating.
▪︎Lock Nut Hardware
-Top Lock flanged nuts are self-locking nuts with uniquely shaped threads to secure the nut on the stud.
-Self-Locking nuts are special due to their ability to minimize vibrations and withstand high heat temperatures.
-Self-Locking nuts are particularly useful with exhaust manifolds where vibrations are frequent and have the likelihood
backing out with a regular flange nut. If you drive a drift daily vehicle or engine with modifications, locking hardware
is highly recommended on all your flange components.
▪︎Installation
-Every kit comes with two regular hex nuts so you can properly install your studs using the “two nut method.”
-When installing the self-locking nut, the fastener will hand-tight to the very end of the nut and will stop.
You’ll need to use a 14mm socket or wrench to complete your installation.
Shipping & Handling
-Products are shipped USPS, UPS, Fed-EX + Tracking.
-Same Day Shipping. Business days Monday-Friday
-Shipment Cut-Off 3:00pm Pacific Standard Time
-Purchased during non-business hours or holiday.
Shipping will be next available day.
“We believe in high quality craftsmanship and ingenuity.
We're working with the best so we can deliver the best.”
Packaged and Distributed in Southern California
